BMW Servicing in Coventry & Warwickshire

BMW Servicing Coventry

What does a BMW service involve?
Each BMW has a specific service schedule depending on the model and engine type. The following example shown is for all BMW 3 series E46 Saloon, Touring, Coupé (built from 2000 – 2005) and Convertible (built from 2000 – 2006) 4cyl.and 6 cyl.petrol and diesel engines.

BMW Condition Based Servicing

A number of BMW models now feature Condition Based Servicing, (CBS), an evolution of the innovative BMW Service Interval Indicator. CBS works by employing sensors to constantly monitor parts subjected to wear and ascertain the extent to which servicing is necessary. This data is then saved and stored on a microchip in your remote control key. Using a KeyReader, our Service staff can download this information to provide an accurate analysis at any given time. This means that until such time that wear progresses to defined limits, no service or maintenance work is required. CBS is not a feature on all BMW models so please ask our Service department for more details.

BMW Engine Oil Service

Parts and fluids included in this package:
Tailored perfectly to each BMW engine, all of our oil filters (genuine BMW and OE) are made with synthetic fibres for even greater robustness. They are capable of meeting the demands of synthetic oils and high oil temperatures, with a large filtration area (up to 3,800 sq. cm) that removes great amounts of impurities such as engine sludge and deposits. Even the finest particles - 0.005 millimetres and smaller- are filtered out, leaving only the purest oil and thus being more environmentally friendly as they reduce fuel consumption. Oil filters are outstanding in their seal quality which prevents impure oil from returning to the oil circuit and in addition protect the engine and extend its service life.

Work performed in this package:

• Engine oil is removed and replaced with new oil
• Oil filter is removed and replaced with new filter
• Service interval indicator resp. Condition Based Service is reset according to factory specifications

PLEASE NOTE: We strongly recommend Service Plus with this basic oil change service

Inspection I

Example shown above is for all BMW 3 series E46 Saloon, Compact, Touring, Coupé (built from 2000 – 2005) and Convertible (built from 2000 – 2006) 4 cyl. petrol and diesel engines. On certain diesel models air and fuel filters are replaced on third engine oil change at a cost, please contact us for specific costs. Excludes M Power models.

Parts included in this package:
This package includes wearing parts, materials and fluids that meet the strict BMW quality standards.

Work performed in this package:
Note: The following list of services refers to the inspection for a BMW 330i Touring. Because inspection services vary from model to model, this list is merely an example of the range of services for a particular model. For an exact description of services in this inspection for your specific vehicle, please contact us.

Body / Electrical Equipment

• Lighting system is checked
• Instrument panel, dashboard illumination, and heater blower fan are checked
• Horn, headlight flasher and hazard warning system are checked
• Condition of seat belt, function of automatic-locking retractor, belt lock and belt buckle are checked
• Acid level and state-of-charge in battery are checked and charged if required**
• Microfilter or activated charcoal filter** are replaced

Engine Compartment

• Test with diagnostic system is performed to determine if any faults had been automatically recorded by the vehicle
• Motor oil and oil filter are removed and replaced with new oil and filter
• Coolant levels are checked; when refilled, concentration of fluid is checked
• At the corresponding interval coolant is changed (every four years at the latest), fluid is added as needed**
• Service interval indicator is reset according to factory specifications
• Fluid level and antifreeze additive in windscreen washer fluid reservoir are checked and topped up if needed
• Steering fluid reservoir is checked and fluid is topped up if needed
• At the corresponding interval brake fluid is replaced (every two years at the latest)**

Undercarriage

• Overall thickness of front and rear disc brake pads is checked using a special tool. If replacement is necessary: surfaces are checked, brake pad contact points in callipers and brake shafts are cleaned. If replacement in rear is necessary: parking brake linings are checked. Wheel centring hubs on light-alloy wheels are greased.**
• Steering system is checked for play, leakage, damage and wear
• Undercarriage and body including all visible parts are checked for damage, leakage, corrosion
• Brake system cables and connections are checked for leaks, damage and correct positioning
• Functionality of parking brake is checked and adjusted where needed according to regulations
• Tyre pressure is checked and adjusted where needed (including spare wheel), and external condition, tread depth and wear pattern are checked

Final Inspection
Roadworthiness is checked, including brakes, steering/power steering, clutch, shock absorbers, control and warning lamps, Check Control (the system that monitors and displays information on the current condition of major functions such as doors, boot lid, lights, etc.)

Inspection II

Example shown is for all BMW 3 series E46 Saloon, Touring, Coupé (built from 2000 – 2005) and Convertible (built from 2000 – 2006) 4cyl. and 6 cyl. petrol and diesel engines. ** for a separate charge. Excludes M Power Products. On certain diesel models air and fuel filters replaced on third engine oil change.

Parts included in this package:
This package includes wearing parts, materials and fluids that meet the strict BMW quality standards.

Work performed in this package:
Note: The following list of services refers to the inspection for a BMW 330i Touring. Because inspection services vary from model to model, this list is merely an example of the range of services for a particular model. For an exact description of services in this inspection for your specific vehicle, please contact us.

Body / Electrical Equipment

• Lighting system is checke
• Instrument panel, dashboard illumination, and heater blower fan are checked
• Horn, headlight flasher and hazard warning system are checked
• Seat belts: condition of seat belt, function of automatic-locking retractor, belt lock and belt buckle
• Battery: acid level and state-of-charge are checked and charged if required**
• Microfilter or activated charcoal filter** are replaced

Engine Compartment

• Test with diagnostic system is performed to determine if any faults had been automatically recorded by the vehicle
• Motor oil and oil filter are removed and replaced with new oil and filter
• Coolant levels are checked; when refilled, concentration of fluid is checked
• At the corresponding interval coolant is changed (every four years at the latest), fluid added as needed**
• Service interval indicator is reset according to factory specifications
• Fluid level and antifreeze additive in windscreen washer fluid reservoir are checked and topped up if needed
• Steering fluid reservoir is checked and fluid is topped up if needed
• At the corresponding interval brake fluid is replaced (every two years at the latest)**
• Spark plugs are replaced
• Intake air cleaner element is replaced

Undercarriage

• Overall thickness of front and rear disc brake pads is checked using a special tool. If replacement is necessary: surfaces are checked, brake pad contact points in callipers and brake shafts are cleaned. If replacement in rear is necessary: parking brake linings are checked. Wheel centring hubs on light-alloy wheels are greased.**
• Steering system is checked for play, leakage, damage and wear
• Undercarriage and body including all visible parts are checked for damage, leakage, corrosion
• Brake system cables and connections are checked for leaks, damage and correct positioning
• Functionality of parking brake is checked and adjusted where needed according to regulations
• Tyre pressure is checked and adjusted where needed (including spare wheel), and external condition, tread depth and wear pattern are checked

Final Inspection
Roadworthiness is checked, including brakes, steering/power steering, clutch, shock absorbers, control and warning lamps, Check Control (the system that monitors and displays information on the current condition of major functions such as doors, boot lid, lights, etc.)

get one of our ultra competitive quotes

choose a convenient date and book in

choose: a) drop car off b) book courtesy car c) arrange pick up/drop off d) wait with your car

receive referral card, recommend our services and get money off next service/repair!! (see our referral page for details)